Sicon Group health and safety on an industrial roofing site: fall protection and safe roof access, South Africa

Health and
Safety

Safety Files, Fall Protection Plans, Training

OHS Act 85 of 1993 Compliance

Safety Management on Roofing and Waterproofing Sites

Health and safety governs how Sicon Group works on industrial, commercial and retail roofing sites. It covers our own crews, any subcontractors working under us, the client's staff who remain on site during the work, and anyone at ground level below it.

Our safety management system is built on the Occupational Health and Safety Act 85 of 1993 and the Construction Regulations, and runs alongside ISO 45001. For work at height that means a fall protection plan, a site-specific risk assessment, and a safety file kept current for the duration of the contract.

Roofing carries real risk: fragile sheeting, unprotected edges, and weather that turns within an hour. Safety work is not about claiming those hazards away. It is about identifying them before the crew goes up, training for the ones that remain, and recording and investigating incidents rather than absorbing them.

SAIOSH membership, the South African Institute of Occupational Safety and Health, held by Sicon Group

SAIOSH is the professional body for occupational safety and health practitioners in South Africa. Membership is held and graded at individual level, on qualification and experience.

Our Health & Safety Standards

Compliance with International Standards

We work to ISO 9001 (Quality Management), ISO 14001 (Environmental Management) and ISO 45001 (Occupational Health & Safety Management). Our policies follow the Occupational Health and Safety Act 85 of 1993, the Construction Regulations and COIDA, alongside current South African labour legislation.

FEM letter of good standing confirming Sicon Group Compensation Fund registration

On-Site Safety Management

Current competency certificates and medical certificates of fitness
Letters of appointment under the OHS Act for responsible persons
Hazard Identification & Risk Assessments (HIRA)
Fall protection plans for all work at height
Safe work procedures & emergency action plans
Safety Data Sheets (SDS) for coatings and solvents on site
Sicon Group health and safety certificates covering ISO standards, fall arrest training and first aid

Trained Crews and Fall Arrest Equipment

Every crew that goes to site includes a qualified first aider and a trained basic firefighter. Site workers and supervisors hold current certification for the work they are doing, and those records are kept up to date rather than renewed once someone asks for them.

Our teams include fall arrest technicians at levels 1 and 2. Work at height is carried out on full-body harnesses, lifelines, shock absorbers and rated anchor points, chosen for the structure being worked on rather than for whatever happens to be on the vehicle.

Sicon Group crew in full personal protective equipment on an industrial roofing site Fall arrest harness and lifeline anchored on an industrial roof Roof technicians working to site safety procedures during a roofing project On-site safety management and PPE compliance on a Sicon Group roofing project

Working at Height and Medical Certificates

Working at height and medical fitness certificates both carry expiry dates, and on a site inspection a lapsed certificate counts the same as no certificate. Ours are tracked centrally, including for our rope access technicians, so nobody arrives at a job holding a document that ran out last month.

Sicon Group team installing a banner on a tall residential building facade by rope access Rope access technicians carrying out maintenance on an industrial structure Rope access workers on exterior maintenance of a steel-clad building using fall arrest equipment Two Sicon Group specialists inspecting a facade by rope access on a tall commercial building Rope access technician suspended while performing vertical wall maintenance on a high-rise building Rope access team working at height on a commercial building Overhead view of a Sicon Group rope access technician descending an industrial structure Aerial view of rope access facade inspection on a multi-storey residential complex

Specialised Safety Roles on Site

A safety plan only helps if the person trained to use it is already on the roof. Our crews carry their own first aid and fire response capability rather than relying on the client's, and these roles are assigned according to the work:

Fall Arrest Technicians, Levels 1 and 2 — system setup, anchor selection and rescue of a suspended worker
Fire and Emergency Response Personnel — extinguisher use, hot work controls and evacuation
Scaffold & Rigging Specialists — erection, inspection and handover of access structures
Installed roof safety rail anchor points on a Sicon Group project Industrial roofing safety gear and precautions on a commercial roofing site Commercial site safety briefing for the Sicon Group roofing team before work Roof contractors wearing personal protective equipment while working on site Sicon Group on-site fall protection installation for commercial roofing staff Daily safety toolbox talk with the Sicon Group crew on a commercial project Sicon Group employees checking roof safety measures during training Roofing safety precautions on an urban commercial project Site safety procedures being followed on a commercial roofing project Technicians installing an edge protection system on a high roof Protective equipment in use by Sicon Group roof contractors on a rooftop Safety equipment laid out for a Sicon Group crew before starting work Health and safety procedures in place on a Sicon Group roof Roof inspection safety procedures being carried out on a Sicon Group worksite Sicon Group safety officer supervising operations at a commercial roofing project Safety equipment laid out for a Sicon Group training session

Fall Protection Systems We Install

Some fall protection is worn and some of it is built into the building. We install the fixed side, which stays on the roof after we leave:

Permanent anchor points and roof safety plates
Horizontal lifeline and cable systems
Walkways, mesh panels and access grids

An installed system is designed for the roof it goes onto, so whoever goes up next has something rated to clip onto. See our roof access safety systems.

Technicians fixing anti-slip mesh walkway panels across an industrial roof for safe access Harnessed technician securing a horizontal lifeline fall protection system on a sloped rooftop Technician fixing anchor hardware and lifeline cables to a steel wall for vertical rope access Aluminium walkway grid installed on a commercial roof providing a stable path for technicians Harnessed Sicon Group technician under supervision performing rooftop installation with fall protection rope Fall arrest cable tensioned between two anchor bolts on an industrial metal roof Stainless steel clamp fastened to a roof sheet supporting a high-tension safety lifeline system Two rope access technicians inspecting industrial wall cladding suspended on vertical anchor lines Temporary rooftop grid system installed for safe access and weight distribution during maintenance Sicon Group fall protection crew using vertical access systems for facade maintenance Close-up of a mechanical anchor clamp at a rooftop ridge for connecting fall arrest equipment Sicon Group technician marking a fixing point on a metal roof sheet for anchor installation Harnessed technician performing vertical roof access using mounted anchors and cable safety systems Technician clipped into a safety line installing a permanent fall arrest anchor on a sloped roof edge Galvanised cable bracket with bolted fixings installed for safe anchorage and line management Close-up of a metal clamp and chain tensioning system for fixed cable installation on profiled roof sheeting Rooftop cable system installed alongside a metal walkway for compliant access and fall protection Technicians navigating rooftop safety zones using walkway systems and anchor lines Technician using a rooftop access ladder secured with cable fall protection and an anchor bracket Galvanised roof safety plate anchored on a corrugated steel panel for fall arrest systems

Regular Safety Audits & Inspections

Safety files are reviewed and updated as certificates expire, procedures change, or a new site presents hazards the last one did not. Inspections happen during the contract rather than only at handover, and findings are recorded rather than quietly corrected.

Our Commitment to Zero Harm

Every worker has the right to return home safely at the end of the day. In practice that means the person closest to a hazard is expected to raise it, and raising it is never treated as an interruption. A late job can be recovered. A fall cannot.

Stainless steel roof anchor eye connected to a locking safety carabiner on a Sicon Group fall protection system

Leaders in all Aspects Roofing, Roof Restorations, Roof Coatings, Roof Maintenance, Roof Corrosion Protection & Roof Waterproofing Services Nationwide

25+ Years Experience • Industry Leading Specialists • South Africa-Wide Operations • Nine-Province Service Coverage • One of SA's Largest Roofing Contractors • Strong Brand Presence • Trusted by Facility Managers Nationwide • Trusted by Largest Blue-Chip Companies • Reputation for Innovation and Efficiency • Community Involvement

250+ Skilled Team Members
Certified Project Managers
Specialist Site Supervisors
Full-Time Safety Officers
First Aid Trained Personnel
Fall Arrest Certified Staff
In-House Quantity Surveyors
Certified Site Teams
Brand Ambassador Engagement
Dedicated Project Management
Staff Training Facility
ISO-Standard Safety Training
Daily Quality Control Inspections
Ongoing Roof Condition Monitoring
Real-Time Project Oversight
Clear Communication Policy
Transparent Reporting
Problem-First Diagnostic Approach
Regular Site Progress Updates
Post-Project Support
Turnkey Roofing Solutions
Pre-Solar Roof Remediation
Thermal Insulation Solutions
Energy Cost-Saving Systems
Custom Service Packages
Tailor-Made Scopes per Site
Competitive Pricing Strategies
Price Beat Guarantee
Tailored Maintenance Plans
Long-Term Client Partnerships
Quick Mobilization of Teams
Responsive Project Rollout
Fast Project Turnaround
Large-Scale Contract Experience
Multi-Site Project Management
Complex Project Capability
Collaborative Contractor Approach
Multi-Industry Service Capability
Commercial & Industrial Specialists
Complex Sheeting Remediation
National Industry Accreditations
Trusted Supplier Relationships
Industry Recognition & Trust
No.1 Vendor Approval
Known for Reliability and Delivery
Level 2 B-BBEE Compliant
Proven Track Record
Certificates of Compliance Issued
Documented Compliance Record
Strong Health & Safety Compliance
Guaranteed Workmanship
Supplier Guarantee Certification
Only Approved Product Use
20-Year Guarantee
Premium, Tested Materials
Official Guarantee Certificates
Energy-Efficient Solutions
Waterproofing Specialists
Certified Site Teams
Custom Project Packages
Safe Work Procedures Implemented
Risk Assessments Included
Fall Protection Plans Provided
Onsite Safety Systems Installed
Comprehensive Safety Files
Public Liability Cover
Product Defect Cover
Workmanship Cover
Up-to-Date Safety Protocols
Strong Health & Safety Compliance
COC Documentation Provided
Free Roof Inspections
Detailed Site Assessments
Competitor Quote Reviews
High-Quality Photographic Analysis
Client-Accessible Project Data
Long-Term Service Commitment
Flexible Payment Options
Full Insurance Cover
Energy Cost-Saving Systems
Safe Work Procedures Implemented
Risk Assessments Included
Fall Protection Plans Provided
Onsite Safety Systems Installed
Comprehensive Safety Files
Public Liability Cover
Product Defect Cover
Workmanship Cover
Up-to-Date Safety Protocols
Strong Health & Safety Compliance